Iriondo

IMMERSION

Electropumps MB

MB-1, MB-1/40, MB-3, MB-3/2

MB-4, MB-5, MB-6

MB-5/2, MB-5/3, MB-6/3

Centrifugal motor pump for general cooling and/or transfer in a range of machinery: lathes, milling machines, grinding machines...
Flow rates up to 200 l/min and pressures up to 30 metres.
Available in stainless steel version for water transfer in humidification systems.
Special rod lengths.

MB-1, MB-1/40, MB-3, MB-3/2

MB-4, MB-5, MB-6

MB-5/2, MB-5/3, MB-6/3

Electropumps BC

BC-1, BC-1/1

BC-2, BC-3

BC-4

BC-5, BC-6

Centrifugal electropump for application in machines that require a high flow rate with pressure, allowing the flow of chippings, sludge, etc. Its cast-iron impeller makes it particularly solid and durable.
Commonly used in grinding machines, machining centres, glass cutting machinery...
Flow rates up to 1200 l/min and pressures up to 40 metres.

BC-1, BC-1/1
BC-2, BC-3
BC-4
BC-5, BC-6

Electropumps BCT

Centrifugal electropump suitable for transferring high flow rates at low pressure, allowing transfer of a high percentage of chippings or sludge.
Flow rates up to 600 l/min and pressures up to 15 metres.

Electropumps BCM

Medium-high pressure multi-stage centrifugal electropump with high flow rate. Allows flow of small chippings, waste glass, etc.
Suitable for CNC machinery and glass cutting.
Flow rates up to 150 l/min and pressures up to 110 metres.

Electropumps BCM-2

High-pressure multi-stage centrifugal electropump with high flow rate. Allows flow of chippings, waste glass, etc. Suitable for CNC machinery and glass cutting.
Flow rates up to 300 l/min and pressures up to 240 metres.

Electropumps EBP

Multicellular peripheral pump suitable for pumping low flows at high pressure.
Highly suitable for CNC machines with a turret.
Flow rates up to 80 l/min and pressures up to 140 metres.

EXTERIOR

Electropumps BCX

BCX-2, BCX-3

BCX-4

BCX-5

External monoblock centrifugal electropump, suitable for machines where an immersed pump cannot be installed in the tank, and which require a high flow rate with pressure. Allows flow of chippings or sludge. Its cast-iron impeller makes it particularly solid and durable. Commonly used in grinding machines, machining centres...
Flow rates up to 1200 l/min and pressures up to 40 metres.

BCX-2, BCX-3
BCX-4
BCX-5

Electropumps BPX

Exterior monoblock peripheral electropump for pumping clean liquid. Highly suitable for non-food water circuits.
Flow rates up to 60 l/min and pressures up to 30 metres.

Electropumps BCM SV o SH

Multi-stage centrifugal electropump with exterior vertical (SV) or horizontal (SH) mounting for machinery requiring a medium flow with medium/high pressure. Suitable for CNC machines or others where the pump is to be installed outside the tank.
Flow rates up to 150 l/min and pressures up to 110 metres.

Electropumps

Electropumps MB

Electropumps BC

Electropumps BCT

Electropumps BCM

Electropumps BCM-2

Electropumps EBP

Electropumps BCX

Electropumps BPX

Electropumps BCM SV o SH

Can we help you?